Have questions? Call: 416-235-1818 416-235-1818 or
Too short (minimum 3 characters)
Complete Security Solutions,
Total Peace of Mind
Complete Security Solutions,
Total Peace of Mind
Home»Product Support»DAYLIGHT SAVINGS TIME»DSC

DSC


 
Panel
        Description
           
           
P432
P632
P832
P864
PC1555
PC1616
PC1832
PC1864
PC580
PC585
PC5010
PC5015
PC5020
        To set the system time and date, enter [*] {6} followed by the Master Code. Press [1]. The keypad will now accept 10 consecutive digits.

Enter 4 digits in HHMM format, using a leading 0 if necessary for hours or minutes, using a 24 hour clock.

Enter 6 digits in MMDDYY format.

For example, to program 2:35 PM, February 14 2006: type 1435021406.

Note: if you have an LCD keypad, your installer may have programmed your system to display the date and tyime while the keypad is idle. If this is the case, you may have to press the [#] key to clear the date and time before performing any keypad function.
           
           
           
PC1500
PC1550
PC2525
PC2550
PC3000
        To set the system's internal clock, enter [*] [6] [Master Code] [1]. The "Program" light will flash.

Enter 4 digits in HHMM format, using a leading 0 if necessary for hours or minutes, using a 24 hour clock. For example, 9:05 AM would be entered 0905. 2:35 PM would be entered 1435.

When the time has been entered, press the [#] key to return to "Ready".
           
           
           
PC4000
PC4010
PC4020
        Enter the [Master Code] (PC4000, use the System Grand Master Code only). Use the [<] [>] keys to display the items of the System Master menu. Press [*] to select an item:

[1] Set System Time programs the system's clock. Enter 4 digits in HHMM format, using a leading 0 if necessary for hours or minutes, using a 24 hour clock. For example, to program 2:35 pm, type in 1435.

[2] Set System Date
programs the system's calendar. Enter 6 digits in MMDDYY format. For example, to program February 14 2006 type 021406.

Once time and date have been programmed, press [#] to return the partition to its normal disarmed state.
Please select a panel from the list: